What Is the Difference Between a Telecommunications Contractor and an Electrician in Sacramento, CA? | Sacramento Telecom Techs

What Is the Difference Between a Telecommunications Contractor and an Electrician in Sacramento, CA?

Both trades pull wire through walls and ceilings, so it is easy to assume they do the same job. As a Commercial Network Cabling Contractor Sacramento CA businesses work with alongside their electricians, we wrote this guide to explain the difference between a telecommunications contractor and an electrician, from licenses and voltage limits to the work each one does, and to show when to hire which, or both.

Call now: (279) 206-4379

What Is the Difference Between a Telecommunications Contractor and an Electrician in Sacramento CA?

The main difference is what the wire carries. An electrician installs the power system: service panels, circuits, outlets, lighting and equipment that runs on line voltage. A telecommunications contractor installs the systems that carry data, voice and video: network cabling, fiber optics, phone systems, Wi-Fi, cameras and other low-voltage technology.

In California, the two trades usually hold different licenses. Electricians work under the C-10 Electrical license, while telecom contractors typically hold the C-7 Low Voltage Systems license, which covers communication and energy-limited systems up to 91 volts. Most commercial projects need both trades working together.

In one sentence: an electrician (C-10) powers your building, while a telecommunications contractor (C-7) connects it, installing and certifying the cabling for your network, phones, Wi-Fi and security systems.

What Does Each Trade Do?

Both trades follow the California Electrical Code, but they focus on different systems, use different tools and are measured by different results. An electrician’s work is judged by safe power delivery and inspection. A telecom contractor’s work is judged by signal performance, certification testing and documentation.

Here is how the roles break down.

Telecommunications contractor

Designs, installs and tests data, voice, fiber, Wi-Fi, camera and access control cabling, usually under a C-7 license.

Electrician

Installs and repairs power wiring, panels, circuits, outlets, lighting and motors, usually under a C-10 license.

Where they overlap

Telecom rooms, grounding, PoE devices and smart building systems need both trades to coordinate closely.

Telecommunications Contractor vs. Electrician Services in Sacramento CA

This table shows common building tasks and which trade usually handles each one.

TaskTelecom contractor (C-7)Electrician (C-10)
Network cabling (Cat6, Cat6A)Core service, installed and certifiedAllowed, but often not a specialty
Fiber splicing and testingCore serviceRarely offered
Phones, Wi-Fi, cameras, access controlCore serviceSometimes
Power for racks and telecom roomsNot allowed above 91 voltsCore service
Panels, outlets and lighting circuitsNot allowedCore service
Low-voltage fire alarm systemsExcluded from the C-7 licenseAllowed under C-10

Call a telecom contractor for networks

New data drops, network upgrades and telecom room buildouts that need certified, labeled cabling.

Call a telecom contractor for fiber

Fiber backbones, building-to-building links, splicing and loss testing.

Call a telecom contractor for communications

Phone systems, Wi-Fi access points, paging and intercom systems.

Call a telecom contractor for security cabling

Camera, access control and other energy-limited security system wiring.

Call an electrician for power

New circuits, panel upgrades, outlets, lighting, EV chargers and equipment power.

Call an electrician for fire alarm

Fire alarm systems require a C-10 or other properly licensed contractor, not a C-7.

Why the Difference Matters for Sacramento CA Projects

California licensing rules decide who can legally do which work on your Sacramento project. Keep these numbers in mind.

91 V

The voltage limit for energy-limited systems under the C-7 Low Voltage Systems license.

$1,000

The job value, labor and materials combined, at which California requires a CSLB-licensed contractor.

4 yrs

Journey-level experience CSLB requires within the last 10 years before a contractor can qualify for a license.

2026

The year the 2025 California Electrical Code, based on the 2023 NEC, took effect on January 1.

City vs. county permits

The City of Sacramento and Sacramento County run separate building departments, and each trade may need its own permit.

New construction coordination

Sacramento’s growing office, healthcare and multifamily projects need power and low-voltage plans aligned early.

Certified electricians

People doing electrical work for C-10 contractors must be state-certified electricians or registered trainees.

Public works projects

State, school and city projects require DIR registration and prevailing wages for both trades.

Whichever trade you hire, the license is what makes the work legal and protects you if something goes wrong. If you’re asking Does a telecommunications contractor need to be licensed?, our licensing guide explains the $1,000 rule, the C-7 and C-10 classes, bond and workers’ compensation requirements, and how to check any contractor on the CSLB website.

How Telecom and Electrical Work Fit Together in Sacramento CA, Step by Step

On most commercial projects, the two trades work side by side. This is how a well-run project divides and coordinates their work.

  1. Define the scope

    List every system in the project, from power and lighting to network cabling, phones, Wi-Fi, cameras and fire alarm.

  2. Split the work by trade

    Power, panels and circuits go to the electrician; data, voice, fiber and other low-voltage systems go to the telecom contractor.

  3. Verify licenses

    Check each contractor’s CSLB license class, bond and workers’ compensation before signing a contract.

  4. Coordinate the drawings

    The electrician and telecom contractor align telecom room power, outlet locations, pathways and grounding.

  5. Pull permits

    Each trade confirms City of Sacramento or Sacramento County permit needs for its part of the work.

  6. Rough in power and pathways

    The electrician installs circuits and the grounding connection, and conduit and sleeves are set for low-voltage cable.

  7. Install low-voltage cabling

    The telecom contractor pulls, terminates and labels cable while keeping required separation from power.

  8. Test, inspect and document

    Circuits pass inspection, cabling is certified, and both trades deliver as-builts and test results.

License and Code Requirements for Each Trade in Sacramento CA

These are the licenses, certifications and code rules that separate telecom work from electrical work in California.

License, certification or codeWhat it covers
C-7 Low Voltage SystemsCommunication and energy-limited systems up to 91 volts, excluding low-voltage fire alarm systems.
C-10 ElectricalElectrical wiring and equipment at any voltage, including power, lighting and fire alarm systems.
DIR electrician certificationRequired for workers who perform electrical work for C-10 contractors.
California Electrical Code, communicationsRules for communication cables, ratings, grounding and separation from power conductors.
California Electrical Code, power-limited circuitsRules for Class 2 and Class 3 circuits, including many PoE and control systems.
ANSI/TIA cabling standardsTIA-568, 569, 606 and 607 set performance, pathway, labeling and grounding rules for telecom cabling.

Common Mistakes When Hiring Between the Two Trades

Hiring the wrong license class

A C-7 contractor cannot install power circuits, and work outside a license class can void protections.

Skipping certification testing

Network cable that is installed but never certified may not support the speeds you paid for.

Running data beside power

Poor separation from power wiring can cause interference and code violations.

No coordination between trades

Telecom rooms end up without enough outlets, dedicated circuits or grounding.

Using an unlicensed installer

Jobs of $1,000 or more require a licensed contractor, no matter how simple the work seems.

Assigning fire alarm to a C-7

Low-voltage fire alarm systems are excluded from the C-7 license.

Telecommunications Contractor vs. Electrician at a Glance

This comparison sums up how the two trades differ in licensing, skills and results.

FactorTelecommunications contractorElectrician
California licenseC-7 Low Voltage SystemsC-10 Electrical
Voltage rangeEnergy-limited systems up to 91 voltsAny voltage
Main workData, voice, fiber, Wi-Fi and security cablingPower, panels, circuits and lighting
Key toolsCable certifiers, fiber splicers, OTDRs, Wi-Fi analyzersMultimeters, circuit testers, conduit benders
How work is provenCertification test reports and labeled as-builtsPermit inspection and electrical testing
Common industry credentialsManufacturer and BICSI certificationsState electrician certification

A C-10 contractor may also install low-voltage cabling. When network performance matters, ask any contractor for certification test results.

Pricing is set differently too. Telecom contractors usually price per cable drop or per system, while electricians price per circuit, fixture or project. As a rough guide, hourly rates for both trades in the Sacramento area often fall around $100 to $175 per hour, depending on the job.

The Bottom Line on Telecommunications Contractors vs. Electricians in Sacramento CA

The difference between a telecommunications contractor and an electrician in Sacramento comes down to power versus communication. Electricians, licensed as C-10, deliver safe power to your building. Telecom contractors, usually licensed as C-7, install and certify the cabling that connects your network, phones, Wi-Fi and security systems.

Hire each trade for the work its license covers, verify licenses before you sign, and get both trades coordinating early. Ask for certification tests on every network cable, and your Sacramento building will be both safely powered and reliably connected.

Installation is only the start, though. Networks need ongoing care as devices are added, moved and upgraded, which is why many owners ask Do telecommunications contractors offer maintenance services? Our maintenance guide explains troubleshooting, moves, adds and changes, closet cleanups, re-certification and service agreements that keep your network running smoothly.

Request a Telecommunications Cabling Quote in Sacramento CA

Get your cabling installed, tested and certified on schedule. Every project starts with an itemized quote.

📍
Sacramento, CA

Ready to start your cabling project in Sacramento CA?

Planning a move, buildout or expansion? Tell us about your business, facility and timeline, and we will schedule a site walk and send an itemized quote.

(279) 206-4379 Request a Quote