What Is the Difference Between a Telecommunications Contractor and an Electrician in Sacramento, CA?
Both trades pull wire through walls and ceilings, so it is easy to assume they do the same job. As a Commercial Network Cabling Contractor Sacramento CA businesses work with alongside their electricians, we wrote this guide to explain the difference between a telecommunications contractor and an electrician, from licenses and voltage limits to the work each one does, and to show when to hire which, or both.
What Is the Difference Between a Telecommunications Contractor and an Electrician in Sacramento CA?
The main difference is what the wire carries. An electrician installs the power system: service panels, circuits, outlets, lighting and equipment that runs on line voltage. A telecommunications contractor installs the systems that carry data, voice and video: network cabling, fiber optics, phone systems, Wi-Fi, cameras and other low-voltage technology.
In California, the two trades usually hold different licenses. Electricians work under the C-10 Electrical license, while telecom contractors typically hold the C-7 Low Voltage Systems license, which covers communication and energy-limited systems up to 91 volts. Most commercial projects need both trades working together.
In one sentence: an electrician (C-10) powers your building, while a telecommunications contractor (C-7) connects it, installing and certifying the cabling for your network, phones, Wi-Fi and security systems.
What Does Each Trade Do?
Both trades follow the California Electrical Code, but they focus on different systems, use different tools and are measured by different results. An electrician’s work is judged by safe power delivery and inspection. A telecom contractor’s work is judged by signal performance, certification testing and documentation.
Here is how the roles break down.
Telecommunications contractor
Designs, installs and tests data, voice, fiber, Wi-Fi, camera and access control cabling, usually under a C-7 license.
Electrician
Installs and repairs power wiring, panels, circuits, outlets, lighting and motors, usually under a C-10 license.
Where they overlap
Telecom rooms, grounding, PoE devices and smart building systems need both trades to coordinate closely.
Telecommunications Contractor vs. Electrician Services in Sacramento CA
This table shows common building tasks and which trade usually handles each one.
| Task | Telecom contractor (C-7) | Electrician (C-10) |
|---|---|---|
| Network cabling (Cat6, Cat6A) | Core service, installed and certified | Allowed, but often not a specialty |
| Fiber splicing and testing | Core service | Rarely offered |
| Phones, Wi-Fi, cameras, access control | Core service | Sometimes |
| Power for racks and telecom rooms | Not allowed above 91 volts | Core service |
| Panels, outlets and lighting circuits | Not allowed | Core service |
| Low-voltage fire alarm systems | Excluded from the C-7 license | Allowed under C-10 |
Call a telecom contractor for networks
New data drops, network upgrades and telecom room buildouts that need certified, labeled cabling.
Call a telecom contractor for fiber
Fiber backbones, building-to-building links, splicing and loss testing.
Call a telecom contractor for communications
Phone systems, Wi-Fi access points, paging and intercom systems.
Call a telecom contractor for security cabling
Camera, access control and other energy-limited security system wiring.
Call an electrician for power
New circuits, panel upgrades, outlets, lighting, EV chargers and equipment power.
Call an electrician for fire alarm
Fire alarm systems require a C-10 or other properly licensed contractor, not a C-7.
Why the Difference Matters for Sacramento CA Projects
California licensing rules decide who can legally do which work on your Sacramento project. Keep these numbers in mind.
The voltage limit for energy-limited systems under the C-7 Low Voltage Systems license.
The job value, labor and materials combined, at which California requires a CSLB-licensed contractor.
Journey-level experience CSLB requires within the last 10 years before a contractor can qualify for a license.
The year the 2025 California Electrical Code, based on the 2023 NEC, took effect on January 1.
City vs. county permits
The City of Sacramento and Sacramento County run separate building departments, and each trade may need its own permit.
New construction coordination
Sacramento’s growing office, healthcare and multifamily projects need power and low-voltage plans aligned early.
Certified electricians
People doing electrical work for C-10 contractors must be state-certified electricians or registered trainees.
Public works projects
State, school and city projects require DIR registration and prevailing wages for both trades.
Whichever trade you hire, the license is what makes the work legal and protects you if something goes wrong. If you’re asking Does a telecommunications contractor need to be licensed?, our licensing guide explains the $1,000 rule, the C-7 and C-10 classes, bond and workers’ compensation requirements, and how to check any contractor on the CSLB website.
How Telecom and Electrical Work Fit Together in Sacramento CA, Step by Step
On most commercial projects, the two trades work side by side. This is how a well-run project divides and coordinates their work.
Define the scope
List every system in the project, from power and lighting to network cabling, phones, Wi-Fi, cameras and fire alarm.
Split the work by trade
Power, panels and circuits go to the electrician; data, voice, fiber and other low-voltage systems go to the telecom contractor.
Verify licenses
Check each contractor’s CSLB license class, bond and workers’ compensation before signing a contract.
Coordinate the drawings
The electrician and telecom contractor align telecom room power, outlet locations, pathways and grounding.
Pull permits
Each trade confirms City of Sacramento or Sacramento County permit needs for its part of the work.
Rough in power and pathways
The electrician installs circuits and the grounding connection, and conduit and sleeves are set for low-voltage cable.
Install low-voltage cabling
The telecom contractor pulls, terminates and labels cable while keeping required separation from power.
Test, inspect and document
Circuits pass inspection, cabling is certified, and both trades deliver as-builts and test results.
License and Code Requirements for Each Trade in Sacramento CA
These are the licenses, certifications and code rules that separate telecom work from electrical work in California.
| License, certification or code | What it covers |
|---|---|
| C-7 Low Voltage Systems | Communication and energy-limited systems up to 91 volts, excluding low-voltage fire alarm systems. |
| C-10 Electrical | Electrical wiring and equipment at any voltage, including power, lighting and fire alarm systems. |
| DIR electrician certification | Required for workers who perform electrical work for C-10 contractors. |
| California Electrical Code, communications | Rules for communication cables, ratings, grounding and separation from power conductors. |
| California Electrical Code, power-limited circuits | Rules for Class 2 and Class 3 circuits, including many PoE and control systems. |
| ANSI/TIA cabling standards | TIA-568, 569, 606 and 607 set performance, pathway, labeling and grounding rules for telecom cabling. |
Common Mistakes When Hiring Between the Two Trades
Hiring the wrong license class
A C-7 contractor cannot install power circuits, and work outside a license class can void protections.
Skipping certification testing
Network cable that is installed but never certified may not support the speeds you paid for.
Running data beside power
Poor separation from power wiring can cause interference and code violations.
No coordination between trades
Telecom rooms end up without enough outlets, dedicated circuits or grounding.
Using an unlicensed installer
Jobs of $1,000 or more require a licensed contractor, no matter how simple the work seems.
Assigning fire alarm to a C-7
Low-voltage fire alarm systems are excluded from the C-7 license.
Telecommunications Contractor vs. Electrician at a Glance
This comparison sums up how the two trades differ in licensing, skills and results.
| Factor | Telecommunications contractor | Electrician |
|---|---|---|
| California license | C-7 Low Voltage Systems | C-10 Electrical |
| Voltage range | Energy-limited systems up to 91 volts | Any voltage |
| Main work | Data, voice, fiber, Wi-Fi and security cabling | Power, panels, circuits and lighting |
| Key tools | Cable certifiers, fiber splicers, OTDRs, Wi-Fi analyzers | Multimeters, circuit testers, conduit benders |
| How work is proven | Certification test reports and labeled as-builts | Permit inspection and electrical testing |
| Common industry credentials | Manufacturer and BICSI certifications | State electrician certification |
A C-10 contractor may also install low-voltage cabling. When network performance matters, ask any contractor for certification test results.
Pricing is set differently too. Telecom contractors usually price per cable drop or per system, while electricians price per circuit, fixture or project. As a rough guide, hourly rates for both trades in the Sacramento area often fall around $100 to $175 per hour, depending on the job.
Future Trends for Telecom and Electrical Work in Sacramento CA
PoE lighting
LED lights powered over network cable blur the line between electrical and telecom work.
Smart buildings
HVAC, lighting, security and sensors on one network require closer coordination between trades.
Higher-power PoE
802.3bt delivers up to 90 W per port, so cable choice and heat matter more than ever.
EV charging
Chargers need electricians for power and telecom contractors for network connections.
Fault-managed power
New Class 4 power systems deliver more power over safer cabling, adding new code rules.
Converged trade teams
More projects bring electrical and low-voltage contractors under one coordinated plan.
The Bottom Line on Telecommunications Contractors vs. Electricians in Sacramento CA
The difference between a telecommunications contractor and an electrician in Sacramento comes down to power versus communication. Electricians, licensed as C-10, deliver safe power to your building. Telecom contractors, usually licensed as C-7, install and certify the cabling that connects your network, phones, Wi-Fi and security systems.
Hire each trade for the work its license covers, verify licenses before you sign, and get both trades coordinating early. Ask for certification tests on every network cable, and your Sacramento building will be both safely powered and reliably connected.
Installation is only the start, though. Networks need ongoing care as devices are added, moved and upgraded, which is why many owners ask Do telecommunications contractors offer maintenance services? Our maintenance guide explains troubleshooting, moves, adds and changes, closet cleanups, re-certification and service agreements that keep your network running smoothly.
Request a Telecommunications Cabling Quote in Sacramento CA
Get your cabling installed, tested and certified on schedule. Every project starts with an itemized quote.
Ready to start your cabling project in Sacramento CA?
Planning a move, buildout or expansion? Tell us about your business, facility and timeline, and we will schedule a site walk and send an itemized quote.
(279) 206-4379 Request a Quote